Product Introduction
CNC Glass Cutting Machine is a digitally programmed glass cutting system that converts CAD or other supported digital patterns into CNC cutting paths for straight, curved, circular and irregular glass shapes. Unlike automatic cutting systems focused primarily on automated sheet handling and production flow, this machine emphasizes digital pattern processing, cutting optimization and programmable CNC interpolation for flexible production of different glass geometries.
Description
Mechanical and Electric parts:
|
Mechanical |
Electric |
||
|
Platen |
Density board |
Controller |
Galil |
|
Guide |
Taiwan |
Servo Motor |
Yaskawa |
|
Relay |
SCHNEIDER |
||
|
Cutting Wheel |
Bohle |
Terminal |
WEIDMULLER |
|
laser sensor |
PANSONIC |
Proportional solenoid valve |
SMC |
Technical Parameters:
|
Equipment dimensions |
4400mm*3140mm |
Equipment weight |
3T |
|
Max Glass size |
3660mm*2440mm |
Height |
800mm±50mm |
|
Glass Thickness |
3~19mm |
Oil supply method |
Pneumatic automatic oil filling |
|
Cutting Speed |
0~180m/min |
Power supply |
380V/50HZ |
|
Straight line parallelism |
≤±0.25mm/m |
Equipment power |
11KW |
|
Diagonal accuracy |
≤±0.30mm/m |
Compressed air |
0.6MPa |
|
Loading Arm |
3 |
Cutting Holder |
The cutter head can be rotated 360° (can accurately cut any straight line and various shaped glass) |
Glass Cutting Workflow
Digital Pattern → Cutting Optimization → Glass Positioning → CNC Scoring → Breaking
The cutting software processes the digital pattern, optimizes its layout on the glass sheet and generates the CNC cutting path. The positioning system establishes the glass position before the CNC-controlled cutter executes the programmed scoring path, followed by downstream glass breaking.
Key Cutting Features
360° Rotating Cutting Head
The 360° rotating cutter head maintains the required tool orientation while following programmed straight and shaped paths, supporting continuous processing of different glass contours without manual cutter adjustment.
Servo-Controlled CNC Movement
Servo-driven axes execute programmed X-Y movements and interpolation paths, supporting repeatable cutter positioning for straight lines, curves and irregular contours.
Proportional Cutting Pressure Control
A proportional solenoid valve adjusts pneumatic pressure applied to the cutting head according to the glass and cutting conditions, helping maintain consistent scoring force across different cutting jobs.
Automatic Pneumatic Oil Supply
The pneumatic oil supply delivers cutting oil to the cutting wheel during scoring, maintaining wheel lubrication and reducing the need for manual oil application.
Cutting Capability
Straight-Line Cutting
Programmed straight-line paths for standard rectangular and linear glass components.
Curved Cutting
CNC interpolation supports programmed curves and continuously changing contours.
Circular Cutting
Programmable circular paths for round holes, circular panels and other radial geometries.
Irregular Shape Cutting
Digital cutting paths can be used for customized and non-linear glass contou
Multi-Size Production
Different glass dimensions and cutting patterns can be processed by recalling or loading the corresponding digital programs.
Repeat Production
Stored cutting programs allow previously defined patterns to be reproduced for repeat orders.
Integrated Cutting Optimization
The cutting software converts supported digital patterns into optimized cutting layouts and CNC paths before production.
Digital Pattern Processing: CAD or other supported digital cutting data can be imported and converted into machine-readable cutting paths.
Automatic Nesting: The software arranges multiple glass components within the available sheet area to improve material utilization and reduce unnecessary offcuts.
Cutting Path Generation: The optimized layout is converted into CNC movement paths for programmed scoring of straight lines, curves, circles and irregular contours.
Job & Pattern Management: Cutting patterns can be stored and recalled for repeat orders, reducing repeated manual programming and supporting consistent production setup.
Installation, Integration & After-Sales
Production Line Integration
The machine can be connected with loading, transfer, breaking, washing and other glass-processing equipment. Integration is designed around the existing equipment interfaces, working height and glass flow.
Installation & Commissioning
Installation support includes machine positioning, electrical connection, CNC setup, sensor calibration, cutting adjustment, test runs and operator training. On-site engineering service is available for overseas projects.
Spare Parts & Technical Support
Cutting wheels, cutting oil, belts and other wear parts are available from the manufacturer. Remote support covers fault diagnosis, parameter adjustment and maintenance guidance. Service resources in Egypt and Qatar provide installation and technical support in the MENA region.
Production Capacity
Production capacity depends on glass size, cutting pattern, cutting speed, loading method and downstream breaking operations.
|
Capacity Parameter |
Specification |
|
Maximum Cutting Speed |
160 m/min |
|
Typical Cycle Time |
40–60 sec/sheet |
|
Production Output |
Up to 60–90 sheets/h |
|
Production Mode |
CNC-programmed batch production |
Packaging & Delivery
Machine Fixing: The machine is fixed to a steel frame or reinforced base before shipment to prevent movement during transportation.
Waterproof Protection: The machine is wrapped with waterproof protective film, with additional protection applied to the electrical cabinet and other moisture-sensitive components.
Cutting System Protection: The cutting head, guide rails and other precision components are separately secured and protected against impact.
Electrical Components: The control cabinet and exposed electrical connections are covered and secured to reduce the risk of moisture and handling damage.
Accessories & Spare Parts: Cutting wheels, tools, cables and other loose accessories are packed separately and secured inside the shipment.
Container Loading: The machine and accessories are positioned and secured inside the container according to their dimensions and lifting requirements.
Documentation: Operation manuals, electrical diagrams, maintenance information, packing list and commercial invoice are supplied with the shipment.
FAQ
Q: What should I consider when choosing a CNC glass cutting machine?
A: Compare the required glass size and thickness, cutting pattern, production volume, automation level, software functions and compatibility with existing equipment.
Q: How does a CNC glass cutting machine differ from manual glass cutting?
A: CNC cutting uses programmed digital patterns and controlled machine movement, reducing manual measuring, marking and cutter positioning during repetitive production.
Q: Can one CNC glass cutting machine handle different glass sizes and cutting patterns?
A: Yes. Different cutting patterns can be programmed through the CNC system, allowing production orders with different dimensions and geometries to be processed on the same machine.
Q: Does a CNC glass cutting machine require specialized software?
A: The machine uses cutting software to prepare digital patterns, optimize the sheet layout and generate the cutting path for CNC processing.
Q: What consumables are required for CNC glass cutting?
A: The main consumables include cutting wheels and cutting oil. Belts and other wear parts may also require replacement during machine service.
Q: How often should the cutting wheel be replaced?
A: Replacement depends on glass type, thickness, cutting volume, cutting pressure and wheel condition. The wheel should be replaced when wear begins to affect the score line or cutting consistency.
Q: What routine maintenance does a CNC glass cutting machine require?
A: Routine maintenance includes checking the cutting wheel, lubrication system, guide and transmission components, pneumatic system, sensors and electrical connections.
Q: What information should be included in a CNC glass cutting machine RFQ?
A: Provide the required glass size and thickness, glass type, typical cutting shapes, production volume, automation requirements and destination country. Existing line equipment should also be identified when integration is required.
Q: Can replacement parts be purchased directly from the machine manufacturer?
A: Yes. Cutting wheels, cutting oil, belts and other applicable wear parts can be supplied directly by the manufacturer for routine replacement and maintenance.
Q: What documents are normally supplied with the machine?
A: The machine can be supplied with operating instructions, electrical diagrams, maintenance information, spare-parts information and required shipping or compliance documents.
Hot Tags: cnc glass cutting machine, China cnc glass cutting machine manufacturers, suppliers, factory, Automatic Glass Cutting Machine, CNC Glass Cutting Machine, glass cutting machine